CANSHIELD SA300 Modified Bitumen Membrane
CANSHIELD™ SA300 is an self-adhered SBS-modified bitumen sheet membrane for use in approved multi-ply membrane waterproofing assemblies. CANSHIELD SA300 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a tough, dimensionally stable non-woven polyester mat. The topside is surfaced with polyolefin film and underside is surfaced with a silicone release film that is removed during application.
Product Description
PRODUCT NUMBERS:
10030202-3.0mm x 1.0m x 10.0m - Roll
PRODUCT DESCRIPTION & FEATURES:
CANSHIELDTM SA300 is an self-adhered SBS-modified bitumen sheet membrane for use in approved multi-ply membrane waterproofing assemblies. CANSHIELD SA300 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a tough, dimensionally stable non-woven polyester mat. The topside is surfaced with polyolefin film and underside is surfaced with a silicone release film that is removed during application.
Basic USES:
CANSHIELDTM SA300 can be applied to non-exposed course, underground and indoor engineering of various buildings, as well as waterproofing works such as open-excavation subways, tunnels, pools, and canals, especially for waterproofing works that open flames are not allowed.
APPLICATION:
Prior to installation, unroll CANSHIELDTM SA300 onto the deck and allow to relax. Place CANSHIELDTM SA300 in desired position and back roll the product. Apply approved adhesive or primer following manufacturer specifications. CANSHIELDTM SA300 is then placed into the
adhesive or primer and rolled with a weighted roller to ensure adhesion.
Refer to Canlon’s published technical literature for additional details and application requirements.
Limitation:
Do not apply to contaminated, wet, or damp surfaces.
Primer may be needed
STORAGE:
Store rolls in an upright position to prevent damage. Store in a clean, dry location and cover as necessary to protect from environmental damage such as extreme cold, heat or moisture.
STESTING ＆ APPROVALS
According to the Chinese National Standard GB 23441 《Self-adhering polymer modified bituminous waterproof sheet
TECHNICAL INFORMATION & TESTING:
Flexible Roofing Truss Head Screw Sw5.5/6.3*L for Roofing System Accessories
SBS/APP is a modified bitumen base sheet consisting of polymer modified asphalt added viscosifier inside covering with different upper separated materials and underside with silicone antisticking layer. There have two kinds of thickness: 3.0 mm and 4.0 mm.
เราคัดสรรสินค้าคุณภาพมาตรฐานสากล พร้อมทีมงานผู้เชี่ยวชาญให้คำปรึกษาและบริการติดตั้งครบวงจร หากคุณกำลังมองหา ระบบกันซึม Membrane System สำหรับงานก่อสร้างหรือซ่อมแซมโครงสร้าง ติดต่อเราได้เลย เราพร้อมให้บริการด้วยสินค้าคุณภาพและราคาที่คุ้มค่า
Rubberized Bituminous Waterproof Sheet Material is a thermoplastic and elastic modified bituminous dipping and coatingmaterial made out of Stylene-Butadiene-Stylene (SBS)
CANLON brand Likfix is a one component anti-sagging Polyurethane Waterproofing Coating made out of the main materials of isocyanate and polyether polyol, together with various auxiliaies and fillers. Likfix Waterproofing Coating can achieve even thickness after one time spraying on vertical wall. Sp
หากคุณกำลังมองหา ระบบกันซึม Membrane System สำหรับงานก่อสร้างหรือซ่อมแซมโครงสร้าง ติดต่อเราได้เลย
Canlon CCCW Cement-based Penetrating Crystalline Waterproof Coating is a powdery, rigid waterproof material composed of specialized cement, quartz sand, and other components. It contains a blend of active chemical substances that, when mixed with water, form a slurry. This slurry is applied to the s