PET Wet-applied Self-adhesive Bitumen Waterproofing
CANLON PET is a self-adhesive waterproof membrane, with self-adhesive rubber bitumen coated on the surface of polyester film and finally covered with a release film. It is mainly used for wet applied application or bonding with paint to form a composite waterproof system. It is one of the most widely used waterproof materials at present.
Product Description
PET Wet-applied /Self-adhesive Waterproofing Membrane
CANLON PET is a self-adhesive waterproof membrane, with self-adhesive rubber bitumen coated on the surface of polyester film and finally covered with a release film. It is mainly used for wet applied application or bonding with paint to form a composite waterproof system. It is one of the most widely used waterproof materials at present.
Specification
Classification
According to the difference of material properties, it can be divided into wet-applied and self-adhesive waterproofing membrane.
Product Features
1. Silver Film Surface, not Easy to Blister
The surface of the membrane is a silver film surface. Compared with the dark film surface, it can effectively avoid quality problems such as spitting and blistering in the case of sun exposure.
2. Low Requirements for Substrate
Adapt to the relatively harsh job site environment, and can deal with damp and uneven bases calmly.
3. Excellent bonding performance
Super strong bonding performance, no risk of "water channeling", extremely low leakage rate, reducing later maintenance costs.
4. Simple Installation
The Installation is relatively simple and requires a little training for the workers. The reduction of the installation difficulty can effectively ensure the stability of the construction quality.
5. Safety and Environmental Friendly
It can be wet-applied with cement-based materials, no need for primer or hot melt, no volatile solvent, no fire hazard, no human injury.
Application
1. Basement and roof waterproofing of industrial ancivil building.
2. Municipal waterproof proiects, such as: subwavutility tunne
Accessories
BAW Adhesive for Wet-applied Waterproofing Membrane
CANSHIELD™ SBS 300 is an SBS-modified bitumen sheet membrane for use in approved multi-ply membrane waterproofing assemblies. CANSHIELDTM SBS 300 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a tough, dimension
MPU™ 6MPA is a two-component, high-strength,self-leveling, liquid applied, coal tar free polyurethane waterproofing membrane.
เราคัดสรรสินค้าคุณภาพมาตรฐานสากล พร้อมทีมงานผู้เชี่ยวชาญให้คำปรึกษาและบริการติดตั้งครบวงจร หากคุณกำลังมองหา ระบบกันซึม Membrane System สำหรับงานก่อสร้างหรือซ่อมแซมโครงสร้าง ติดต่อเราได้เลย เราพร้อมให้บริการด้วยสินค้าคุณภาพและราคาที่คุ้มค่า
Kyflex 321 is a two-component, solvent-free, self-leveling polyurethane flooring material. After install the liquid can solidify instantly to provide superior chemical resistance and good low temperature flexibility. Kyflex 321 is available to be reinforced by aggregate and suitable for most of the
Canlon Anti-Static Industrial Epoxy Membrane Industrial Epoxy Flooring
จำหน่าย ระบบกันซึม Membrane System ครบวงจร วัสดุป้องกันการรั่วซึมที่ได้รับความนิยมสูงสุดในงานก่อสร้างสมัยใหม่ ด้วยคุณสมบัติในการป้องกันน้ำและความชื้นได้อย่างมีประสิทธิภาพ เหมาะสำหรับงานหลังคา ดาดฟ้า พื้นใต้ดิน สระว่ายน้ำ และงานโครงสร้างต่าง ๆ
CANSHIELD™ SBS500 is is an SBS-modified bitumen cap ply for use in approved multi-ply membrane waterproofing assemblies. CANSHIELDTM SBS500 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a tough, dimensionally s
CANLON PE Self-adhesive Waterproofing Drainage Board is a kind of polymer waterproof board with drainage function, which is mainly used for the waterproofing of undercut tunnels. This product is mainly composed of a concave-convex board and an adhesive tape. The adhesive tape can facilitate the inst