CANFLEX TPO-P1 Roofing Membrane
CANFLEX TPO-P1 is a high-quality, polyester-reinforced TPO waterproofing membrane for mechanically fastened roofing systems.
Product Description
General Description
CANFLEX TPO-P1 is a high-quality, polyester-reinforced TPO waterproofing membrane for mechanically fastened roofing systems.
USES
Waterproofing membrane for:
• Mechanically fastened roofing systems
• Loose laid ballasted roofs with different ballast materials (e.g. gravel, concrete slabs)
• Green roofs (intensive, extensive)
• Utility roofs
• Inverted roofs
CHARACTERISTICS/ADVANTAGES
• Outstanding weather resistance, including long-term resistance to UV radiation;
• Superior welding performance;
• Excellent low-temperature flexibility;
• Good elongation;
• Good impact resistance;
• High solar reflectance (based on white surface);
• Environmentally friendly and recyclable.
PRODUCT INFORMATION
PRODUCT PROPERTIES
BASIS of PRODUCT DATA
All technical data stated in this Product Data sheet are based on laboratory tests. Actual measured data may vary due to circumstances beyond our control.
APPLICATION INSTRUCTION
Substrate quality
• The base surface must be uniform, flat, and free of sharp protrusions or burrs.
• The layer in direct contact with the sheet must be compatible with the sheet, clean, dry, and free of oil.
Application method
The roofing sheets are mechanically fixed at the lap edges or in the middle of the sheets.
If the lap edges are slightly contaminated, it is recommended to clean them with a suitable cleaner before hot air welding.
The lap seams are welded using an electric welder, such as a manual hot air gun, a pressure roller, or an automatic welding machine, with the welding temperature controlled within a reasonable range
Rubberized Bituminous Waterproof Sheet Material is a thermoplastic and elastic modified bituminous dipping and coatingmaterial made out of Stylene-Butadiene-Stylene (SBS)
Lexible Roofing Truss Head Screw Sw5.5. /6.3*L Canlon Roofing System Accessories
CANSHIELDTM 150AL is a 1.5mm self-adhered, SBS-modified bitumen membrane for use in approved waterproofing assemblies. CANSHIELDTM 150AL is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen blend. The topside is surfaced with an Al/PET comp
CANLON brand MPU is a one component Polyurethane Waterproof Coating made out of the main materials of isocyanate and polyether polyol, together with various auxiliaries and fillers. It has excellent physical and mechanical properties, great construction performance and good corrosion resistance. MPU
CANLON CL-JS is a two-component, water-based architectural waterproof coating made of organic liquid material and inorganic powder through a reasonable ratio. The organic liquid material is composed of polyacrylate and various additives, and the inorganic powder material is composed of inorganic fil
Rubberized Bituminous Waterproof Sheet Material is a thermoplastic and elastic modified bituminous dipping and coatingmaterial made out of Stylene-Butadiene-Stylene (SBS)
MBP-Plus polymer double-sided pre-applied waterproofing membrane is composed of a layer of release film, a white polymer sheet (HDPE), a particle protective layer, and two layers of pressure-sensitive adhesive. Based on the normal pre-applied waterproofing membrane, with a self-adhesive layer added
Elastomer (APP) Modified Bituminous Waterproof Membrane